Xiaomi vacuum mop - water level

[kozlovdk]

Hi,
There is possibility after installation mop in vacuum, to change on card water level ? Like on official xiaomi app ?

[PiotrMachowski]

Is it possible to do it using HA service call?

[weemaba999]

Oh yes, I meent when I adder your code to the card, the icons are not changing, thats why I wanten to see the final card of kozlov :-)

[weemaba999]

This is the code I use for mopping. But in this code, I need to use a input_select with room names to start the corresponding script. Maybe, you'll use this as inspiration for your config and expand your vacuum map card ? :-) I'd love to use the zone select also for the mopping. Actually it's pretty simple script, but need to know how to embed in your layout.

So actually:

• Embed the drop for water intensity as above
• embed the mop route : Standard vs Deep
• Also use the zones select for the mopping

below the code:

  set_mopping_route:
    alias: Set mopping route
    fields:
      route:
        description: 'Mopping route - can be: standard | deep'
        example: standard
    sequence:
      - alias: Config variables
        variables:
          config_mopping_route:
            standard: 300
            deep: 301
          mopping_route: '{{ config_mopping_route[route]}}'
      - choose:
          - alias: Invalid mopping route value
            conditions:
              - condition: template
                value_template: '{{ route not in config_mopping_route|list }}'
            sequence:
              - service: system_log.write
                data:
                  message: >-
                    Invalid mopping_route value '{{ route }}'. Valid values are {{
                    config_mopping_route|list|join(', ') }}
                  level: warning
                  logger: roborock
        default:
          - alias: Set mopping route
            service: vacuum.send_command
            target:
              entity_id: vacuum.jarvis
            data:
              command: set_mop_mode
              params: '[{{ mopping_route }}]'
    mode: single

mop_gang:
    alias: Mop Gang
    sequence:
      - service: xiaomi_miio.vacuum_remote_control_stop
        target:
          entity_id: vacuum.jarvis
        data: {}
      - delay:
          hours: 0
          minutes: 0
          seconds: 2
          milliseconds: 0
      - service: script.set_mopping_route
        target:
          entity_id: vacuum.jarvis
        data:
          route: standard
      - service: vacuum.send_command
        target:
          entity_id: vacuum.jarvis
        data:
          command: app_segment_clean
          params:
            - 19
      
    mode: single
    icon: mdi:robot-vacuum

[PiotrMachowski]

Does your vacuum have an attribute/entity that shows current status of mop water intensity and mop route?

[weemaba999]

No, not as attributes, but I can change intensity & route

[PiotrMachowski]

Ok, in this case you can use following approach:

• create 2 input_selects to make it possible to read "current" value of water intensity/mop route
• create 2 automations that will send selected values to the vacuum
• add controls to the map card. Example:

  append_icons: true
  icons:
    - icon: mdi:gauge-empty
      conditions:
        - entity: input_select.jarvis_mop_route
          value: "standard"
      tap_action:
        action: call-service
        service: input_select.select_next
        service_data:
          entity_id: input_select.jarvis_mop_route
          cycle: true
    - icon: mdi:gauge-full
      conditions:
        - entity: input_select.jarvis_mop_route
          value: "deep"
      tap_action:
        action: call-service
        service: input_select.select_next
        service_data:
          entity_id: input_select.jarvis_mop_route
          cycle: true

[rico47]

Where above code insert?

[PiotrMachowski]

In card's config

[rico47]

ok, thats not working whith my roborock s7. I'm new in HA and posible I do that wrong

[PiotrMachowski]

It is not a simple thing to do, you have to complete these steps first:

• create 2 input_selects to make it possible to read "current" value of water intensity/mop route
• create 2 automations that will send selected values to the vacuum

You can also migrate to custom Roborock integration and everything should work out of the box.